6AG1195-7HB00-7XA0
Siemens 6AG1195-7HB00-7XA0 is a SIPLUS ET 200M active bus module based on 6ES7195-7HB00-0XA0, with conformal coating, -40…+70 °C range, and…
Siemens automation product category
Rugged Automation Hardware
SIPLUS controllers, I/O, HMI, communication, power and drive products for automation equipment subject to demanding environmental conditions.
Rugged Automation Hardware products
Compare model references and available product information, then use Request a Quote to send the exact item to our team.
6AG1193-4CA30-2AA0
Siemens 6AG1193-4CA30-2AA0 is a SIPLUS ET 200S TM-E15C24-A1 variant based on 6ES7193-4CA30-0AA0 with conformal coating and -40…+70 °C. Request a…
6AG1131-6TF00-7CA0
Siemens 6AG1131-6TF00-7CA0 is a SIPLUS ET 200SP DI 8xNAMUR HF digital input module with conformal coating, -40…+70 °C rating, and…
6AG1216-4BS00-7AC2
Siemens 6AG1216-4BS00-7AC2 is a SIPLUS XC216-4C managed Layer 2 IE switch with conformal coating, -40…+70 °C operation, 12x 10/100 Mbps…
6AG1315-6FF04-2AB0
Siemens 6AG1315-6FF04-2AB0 is a SIPLUS S7-300 CPU 315F-2 DP based on 6ES7315-6FF04-0AB0 with conformal coating, 24 V DC supply, 384…
6AG1193-6BP00-7DU0
Siemens 6AG1193-6BP00-7DU0 is an ET 200SP BU type U0 BaseUnit with conformal coating, push-in terminals, and -40…+70 °C operating data.…
6AG1677-2DB40-2AA0
Siemens 6AG1677-2DB40-2AA0 in the SIPLUS ET 200SP CPU 1515SP PC2 range, based on 6ES7677-2DB40-0AA0, with conformal coating, 8 GB RAM,…
6AG1591-1AA01-2AA0
Siemens 6AG1591-1AA01-2AA0 is a SIPLUS S7-1500 front flap V2 CPU 35 mm with conformal coating and a -20…+60 °C range.…
6AG2136-6BA00-1CA0
Siemens 6AG2136-6BA00-1CA0 is a SIPLUS ET 200SP F-DI module based on 6ES7136-6BA00-0CA0, with conformal coating, 24 V DC inputs, and…
6AG1214-1HG40-4XB0
Siemens 6AG1214-1HG40-4XB0 is a SIPLUS S7-1200 CPU 1214C DC/DC/relay with conformal coating, -20…+60 °C, and onboard I/O. Request a model-specific…
6AG1155-6BA01-7CN0
Siemens 6AG1155-6BA01-7CN0 is an IM 155-6 DP HF SIPLUS ET 200SP interface module with conformal coating, -40…+70 °C range, and…
6BK1942-6HA00-0AA0
Siemens 6BK1942-6HA00-0AA0 is a SIPLUS HCS4200 spare part, a 16 A/400 V fuse set for POM4220 Midrange phase angle control…
6AG1221-3AD30-5XB0
Siemens 6AG1221-3AD30-5XB0 is a SIPLUS S7-1200 SB 1221 digital input module with 4 DI, 5 V DC, 200 kHz and…
6AG1193-6BP00-7BA0
Siemens 6AG1193-6BP00-7BA0 is a SIPLUS ET 200SP BaseUnit BU type A0 with push-in terminals, conformal coating, and -40…+70 °C operation.…
6AG1443-1GX30-4XE0
Siemens 6AG1443-1GX30-4XE0 is a SIPLUS NET CP 443-1 Advanced with conformal coating, 0…+60 °C, 1x 10/100/1000 Mbps and 4x 10/100…
6AG1223-0BD30-4XB0
Siemens 6AG1223-0BD30-4XB0 is a SIPLUS S7-1200 SB 1223 digital input/output module with 2 DI 24 V DC and 2 DQ…
6AG2526-1BH00-1AB0
Siemens 6AG2526-1BH00-1AB0 is a SIPLUS S7-1500 F-DI 16x24VDC HF module with conformal coating, 16 digital inputs, and 24 V DC…
6AG1326-2BF10-2AB0
Siemens 6AG1326-2BF10-2AB0 SIPLUS S7-300 SM 326 10 F-DO spare part with conformal coating, -25…+60 °C, 24 V DC/2 A PP…
6AG2124-0GC13-1AX0
Siemens 6AG2124-0GC13-1AX0 TP700 Outdoor Comfort Panel with 7 in touchscreen, PROFINET and PROFIBUS DP interfaces, and IP66 front protection. Request…
6AG1505-0KA00-7AB0
Siemens 6AG1505-0KA00-7AB0 is a SIPLUS S7-1500 PS 25W 24VDC system power supply with conformal coating, 24 V DC supply, and…
Category guidance
Selecting Siemens Rugged Automation Hardware for your project
We organise Rugged Automation Hardware by product family and model so you can compare the entries that match your control, visualisation, communication or maintenance requirement.
Send us the complete model or MLFB, quantity and destination when you need a quotation. For an installed or legacy unit, include a nameplate photo or any available system information so we can identify the product correctly.
- Complete Siemens model or MLFB.
- Quantity and delivery destination.
- Reason for the request and relevant system details.
- Nameplate photo and current system context for replacement requests.
Quote checklist
Details for Your Quote
Send the information below so we can identify the requested Siemens product and prepare the quotation.
- 01Product model
Send the complete Siemens model or MLFB. Add a clear nameplate photo if the identifier is incomplete.
- 02Technical requirements
Include the required interfaces, hardware version, expansion, mounting and software details when relevant.
- 03Order details
Add the quantity, required condition, delivery country and target date for each item.
- 04Equipment context
Tell us whether the part is for new equipment, maintenance, retrofit or an installed unit.
Multiple models
Request a Quote for Multiple Models
You can include several Siemens model numbers in one inquiry. Add the quantity and destination for each item, then describe any replacement, interface or installation requirements.