6AG1195-7HA00-2XA0
Siemens 6AG1195-7HA00-2XA0 is a SIPLUS ET 200M active bus module based on 6ES7195-7HA00-0XA0 with conformal coating and -40…+70 °C temperature…
Siemens automation product category
SIPLUS ET 200 Solutions
SIPLUS ET 200 interface and I/O modules for decentralized signal connection where temperature, atmosphere or installation conditions matter.
SIPLUS ET 200 Solutions products
Compare model references and available product information, then use Request a Quote to send the exact item to our team.
6AG1132-6BF01-7BA0
Siemens 6AG1132-6BF01-7BA0 SIPLUS ET 200SP digital output module with conformal coating, -40...+70 °C range, BU type A0 connection and channel…
6AG1134-4JB51-7AB0
Siemens 6AG1134-4JB51-7AB0 is a SIPLUS ET 200S EM 2AI RTD module with conformal coating, -25…+70 °C range, 4 analog inputs,…
6AG2512-1SK01-1AB0
Siemens 6AG2512-1SK01-1AB0 in the SIPLUS ET 200SP CPU 1512SP F-1 PN family, with conformal coating, PROFINET IRT, 3-port switch, and…
6AG1132-6FD00-7CU0
Siemens 6AG1132-6FD00-7CU0 in the SIPLUS ET 200SP range: DQ 4x24..230VAC/2A HF, conformal coating, -40…+70 °C, BU type U0, CC20. Request…
6AG1138-6AA00-2BA8
Siemens 6AG1138-6AA00-2BA8 in the SIPLUS ET 200SP WP321 family, with conformal coating, -40…+60 °C range, RS 485, and load-cell connection…
6AG1134-6TD00-2CA1
Siemens 6AG1134-6TD00-2CA1 is a SIPLUS ET 200SP AI 4xI 2-wire HART analog input module with conformal coating, 16-bit resolution, channel…
6AG1193-4CB30-2AA0
Siemens 6AG1193-4CB30-2AA0 from the SIPLUS ET 200S range. TM-E15C24-01 with conformal coating, -40…+70 °C, spring-loaded terminals, and AUX1 continuous. Request…
6AG1132-6BF61-7AA0
Siemens 6AG1132-6BF61-7AA0 is a SIPLUS ET 200SP digital output module with 8 x 24V DC/0.5A sink outputs, conformal coating, and…
6AG1155-6AU01-7BN0
Siemens 6AG1155-6AU01-7BN0 is an SIPLUS ET 200SP IM155-6PN ST spare part with conformal coating, -40…+70 °C range, and PROFINET interface…
6AG2132-6BH01-4BA0
Siemens 6AG2132-6BH01-4BA0 is a SIPLUS ET 200SP DQ 16x24VDC/0.5A ST digital output module with conformal coating, BU type A0, and…
6AG2155-6AU01-4BN0
Siemens 6AG2155-6AU01-4BN0 is an SIPLUS ET 200SP IM 155-6 PN ST TX interface module with conformal coating, PROFINET, 1 slot…
6AG1137-6AA01-7BA0
Siemens 6AG1137-6AA01-7BA0 is a SIPLUS ET 200SP CM PTP communications module with conformal coating, serial RS-422/RS-485/RS-232 interfaces, and Modbus RTU…
6AG2137-6AA01-4BA0
Siemens 6AG2137-6AA01-4BA0 is a SIPLUS ET 200SP CM PtP rail communication module with RS-422, RS-485 and RS-232, conformal coating, and…
6AG1135-6HB00-2DA1
Siemens 6AG1135-6HB00-2DA1 is a SIPLUS ET 200SP analog output module with AQ 2xU/I high speed, conformal coating, -40…+60 °C, and…
6AG1131-6BF61-7AA0
Siemens 6AG1131-6BF61-7AA0 is a SIPLUS ET 200SP digital input module with 8 inputs, 24 V DC sourcing input, conformal coating,…
6AG2136-6DB00-1CA0
Siemens 6AG2136-6DB00-1CA0 is a SIPLUS ET 200SP F-DQ 4x24VDC/2A module with conformal coating, 24 VDC supply, and fail-safe outputs up…
6AG2193-6BP20-4BB1
Siemens 6AG2193-6BP20-4BB1 is a SIPLUS ET 200SP BU type B1 rail base unit based on 6ES7193-6BP20-0BB1, with conformal coating, push-in…
6AG1132-6BD20-7BA0
Siemens 6AG1132-6BD20-7BA0 is a SIPLUS ET 200SP DQ 4x24VDC/2A ST digital output module, based on 6ES7132-6BD20-0BA0, with conformal coating and…
6AG1193-4CA50-2AA0
Siemens 6AG1193-4CA50-2AA0 is a SIPLUS ET 200S TM-E15C26-A1 terminal module with conformal coating, -40…+70 °C, and spring-loaded terminals. Request a…
Category guidance
Selecting Siemens SIPLUS ET 200 Solutions for your project
We organise SIPLUS ET 200 Solutions by product family and model so you can compare the entries that match your control, visualisation, communication or maintenance requirement.
Send us the complete model or MLFB, quantity and destination when you need a quotation. For an installed or legacy unit, include a nameplate photo or any available system information so we can identify the product correctly.
- Complete Siemens model or MLFB.
- Quantity and delivery destination.
- Reason for the request and relevant system details.
- Nameplate photo and current system context for replacement requests.
Quote checklist
Details for Your Quote
Send the information below so we can identify the requested Siemens product and prepare the quotation.
- 01Product model
Send the complete Siemens model or MLFB. Add a clear nameplate photo if the identifier is incomplete.
- 02Technical requirements
Include the required interfaces, hardware version, expansion, mounting and software details when relevant.
- 03Order details
Add the quantity, required condition, delivery country and target date for each item.
- 04Equipment context
Tell us whether the part is for new equipment, maintenance, retrofit or an installed unit.
Multiple models
Request a Quote for Multiple Models
You can include several Siemens model numbers in one inquiry. Add the quantity and destination for each item, then describe any replacement, interface or installation requirements.